Cim-Tek 70062 Hydrosorb Fuel Tank Filter

68 Ltrs Per Min (10 micron)

Price

£90.85

ex. VAT

Fluids

  • D
  • HVO/GTL
  • AdBlue
  • Air
  • Antifreeze
  • Any
  • Chemical
  • Diesel
  • Grease
  • Jet Fuel
  • Kerosene
  • Oil
  • Petrol
  • Rapsoil
  • HVO/GTL
  • Water
  • Windscreen
Cim-Tek Filters

Hydrosorb & Hydroglass Cim-Tek fuel filters

About the product

This Cim-Tek Hydrosorb Fuel Tank Filter is an industry recognised filter designed to remove water and debris up to 10 micron. These fuel storage tank filters have a spin on resin coated pleated paper canister element, which allows for the easy removal and replacement of the diesel filter element once it becomes full. The Cim-Tek fuel filter is a perfect solution for installation onto fuel storage tanks for refuelling vehicles, lorries, agricultural and plant machinery.

The Cim-Tek 70062 fuel tank filter is suitable for pumping installations up to 68lpm. If you are looking for a higher flow alternative of this Cim Tek Hydrosorb filter, see the 70063 in the related products.

Cim-Tek Hydrosorb fuel tank filter includes two parts, static filter adapter (head) and an element. All Cim-Tek filter components, including the replacement Cim-Tek 70062 element, are available individually as replacements (see accessories table).

Features of the Cim-Tek 70062 Hydrosorb Fuel Tank Filter:

  • 10 micron Cim Tek cannister filter
  • Hydrosorb paper element
  • Maximum flow rate of 68lpm
  • 1" F BSP Flanged
  • For use with diesel
  • Cim-Tek part code: 70062
  • 1 x Element and 1 x Head

Product Models and Features

CodeModelDescriptionPrice
CTH1830Cim-Tek Hydrosorb 70062 Fuel Filter Complete

10 Micron Particle and Water Filter

Paper Filter

Application - Pump

Max Flow Rate (lpm) - 68

Inlet/Outlet - 1" F Flanged BSP

Diesel

£90.85 ex. VAT

Product Accessories

CodeAccessoryPrice
CTH1801

Replacement Head - up to 70 (lpm)

£32.10 ex. VAT
CTH1819

Cim Tek 70062 Fuel Filter Element Only

£55.25 ex. VAT

Scroll left and right to view table

Why do I need a fuel tank filter?

The increasing bio-content in today’s diesel means that the fuel in storage tanks often contains small, but problematic water levels which can cause a nasty sludge to appear. Water contamination is usually one of the main reasons for costly damage to vehicle engines and reduced fuel efficiency, but an effective water filter can be one of the best ways to prevent this. The water tank filter removes any free water from the dispensed fuel, which protects your vehicle engine from failure. Whilst this Cim Tek Hydrosorb filter can get a range of particles, you should also consider a particle fuel filter for removing particles down to finer microns.

How long should a fuel filter last before I need to replace the element?

Unfortunately, there is no exact answer to this question as it all depends on the level of contamination in your fuel. The dirtier the fuel in your tank, the quicker the filter will get full. We advise that you always have a spare filter element on-site so that you experience no downtime if your filter is full and blocks.

If you’re experiencing your filter elements blocking a lot quicker than usual, then this may be down to changes in the bio content of diesel. Read our article to find out more. In this case, we recommend considering fuel tank water absorber such as Aquafighter that removes both free and emulsified water directly from the fuel tank.

Why is it important to know your pump flow rate when choosing your filter?

If your pump is too fast for the maximum flow rate of the filter, the filter will keep blocking leaving you unable to dispense. This may also result in the pump running in partial bypass, causing premature wear on the pump vanes and windings. In extreme cases where you have say a 50lpm filter being used with a 150lpm pump, it may even blow the filter element inside rendering it useless. Therefore, if your pump is 70lpm, your filter must be able to cope with at least that.

If you are buying for resale and have volume enquiries, contact our sales team for pricing by clicking on the below product enquiry button or calling us on +44 (0) 121 351 4445.

Alternatively, visit our trade customers page where you can download account forms to apply for a credit account and receive exclusive trade benefits if approved including trade pricing.

You may also be interested in

Cim-Tek Filter 110lpm
  • D
  • HVO/GTL

Cim-Tek 70063 Hydrosorb Fuel Tank Filter

110 Ltrs Per Min (10 micron)

£167.50 ex. VAT

View product
Cim-Tek Filter for Bio Fuel - 70lpm
  • D
  • HVO/GTL

Cim-Tek 70236 Hydroglass Bio Fuel Tank Filter

70 Ltrs Per Min (10 micron)

£101.60 ex. VAT

View product
Cim-Tek Hydrosorb Fuel Filter Element 10 micron
  • D
  • HVO/GTL

Cim-Tek Hydrosorb Fuel Filter Element 10 micron

from

£55.25 ex. VAT

View product
Aquafighter Anaconda Fuel Tank Water Absorber
  • D
  • K
  • HVO/GTL

Aquafighter Anaconda Fuel Tank Water Absorber

For fuel storage tanks up to 20,000l

from

£104.40 ex. VAT

View product