Aquafighter Anaconda Fuel Tank Water Absorber

For fuel storage tanks up to 20,000l

From

£104.40

ex. VAT

Fluids

  • D
  • K
  • HVO/GTL
  • AdBlue
  • Air
  • Antifreeze
  • Any
  • Chemical
  • Diesel
  • Grease
  • Jet Fuel
  • Kerosene
  • Oil
  • Petrol
  • Rapsoil
  • HVO/GTL
  • Water
  • Windscreen
  • B2
Aquafighter Water Absorber

The Official UK agent of Aquafighter fuel tank water absorber

About the product

Aquafighter Anaconda is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks to provide a complete solution for water contamination. This particular diesel and oil tank water absorber is typically installed through 3.5 inches/9 cm openings on bulk storage tanks with the option to install multiple absorbers on even bigger tanks if they can be removed individually.

As bio content in fuel is increasing, water content and the microbial growth that results from is are becoming serious issues for stored fuel quality. This is often responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. The diesel tank water absorber not only removes free water like other solutions on the market but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment.

By working in this way, the Aquafighter Anaconda fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement requirements and need for tank cleaning and protecting the tank from corrosion.

Understand more about the problem of water in your fuel and Aquafighter as a complete solution here.

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

Features of the Aquafighter Anaconda Fuel Tank Water Absorber:

  • Captures and removes free and emulsified water inside the tank
  • Other products on the market absorb only free water
  • Prevents diesel bug from forming
  • Reduces filter replacement by around 60%
  • Eliminates the need for most additives
  • Reduces water to 75ppm to meet EN590 diesel fuel standards
  • Suitable for diesel, kerosene, biofuel and heating oil

Product Models and Features

CodeModelDescriptionPrice
AQU999028Aquafighter Anaconda 999.028 Fuel Tank Water Absorber

Size: 150cm x 9cm

Absorbs up to 4l

For fuel tanks with a capacity of up to 10000 litres and with openings from 9cm to 20cm

Suitable for diesel, kerosene, biofuel and heating oil

Reduce water level down to 75ppm to meet the EN590 diesel fuel standards

£104.40 ex. VAT
AQU999040Aquafighter Twin Anaconda 999.040 Fuel Tank Water Absorber

Size: 300cm x 9cm

Absorbs up to 8L

For fuel tanks with a capacity of up to 20000 litres and with openings from 9cm to 20cm

Suitable for diesel, kerosene, biofuel and heating oil

Reduce water level down to 75ppm to meet the EN590 diesel fuel standards

£144.25 ex. VAT

How do I use the Aquafighter?

The Aquafighter Finger is small enough to be added directly into the fill point of a piece of agricultural or plant machinery. You can leave it to absorb the water content in the fuel whilst the engine is not running, and remove it when it is. This makes it ideal for ensuring fuel is kept water-free when equipment is not in use.

What do you mean by suspended/bound and emulsified water? Is this different to free water?

Suspended water is that which is bound to the fuel molecules making it appear cloudy, as opposed to free water that presents itself as a separate layer to the fuel at the bottom of the tank. Under pressure changes and agitation, often experienced as the fuel passes through pumps and filters, water can become fully emulsified in fuel which sees it turning from cloudy to milky. This is where there is almost no separation between the fuel molecules and water content.

What is the difference between Aquafighter and other fuel tank water absorbers?

Aquafighter is fuel tank water absorber that removes both free, suspended and emulsified water in the fuel providing a complete solution to water contamination. Aquafighter ensures that your fuel tank is water-free all the time by absorbing the free water and separating and capturing suspended water that makes the fuel looks cloudy. On the other hand, other diesel and oil tank water absorbers on the market can remove only free water, solving half of the problem.

Can Aquafighter clean a dirty fuel tank?

Aquafighter fuel tank water absorbers can remove free and bound water level down to 70ppm (exceeding refinery spec). However, if you have a problem with seriously contaminated fuel with a large quantity of particles, dirt and bacteria, then Aquafighter fuel tank water absorber cannot improve the quality of considerably spoilt diesel fuel. In the event of considerably dirty fuel, we recommend considering professionally cleaning your fuel and tank and then start using Aquafighter to prevent problems with water contamination in the future.

What makes Aquafighter water absorber better than any additives on the market?

Aquafighter fuel tank water absorber is designed to keep your fuel water-free, preventing water contamination and diesel bug growth. Additives usually only treat the symptoms caused by water present in the fuel without solving the actual problem. Also, the diesel tank water absorber does not simply “absorb” water, but separates and captures it, which can save you money and time in repairing damaged equipment.

How long does an Aquafighter tank water absorber last?

Unfortunately, there is no straight answer to this question as Aquafighter water absorber can be influenced by factors such as how bad the fuel is contaminated, high humidity, leaks that require you to replace the tank water absorber more often. You can, however, retrieve Aquafighter at any time to check whether it appears full.

Should I worry about the Aquafighter expanding too much?

No. The Aquafighter fabric membrane is designed to resist expansion even when full. This is designed so that there is zero risk of removing it from the tank when it is full.

Is there a proof the Aquafighter diesel tank water absorber works?

The efficiency of the fuel tank water absorber has been tested over 7000 times by two of the largest fuel producers in the world and at the renown Saybolt Laboratories in Sweden. In every test sample, the results show that Aquafighter water absorber removes bound water to less than 70ppm. This and many more satisfied customers prove the Aquafighter is a perfect solution for water contamination in fuel.

Don't just take our word, learn more about how Aquafighter diesel tank water absorber can help you keep your fuel tank water-free, click here to read the product guide.

Which Aquafighter model do I need?

The model of Aquafighter water absorber best suited to your requirements depends on two things; the size of your tank opening that the Aquafighter will be lowered into, and the capacity of the tank. Once you have this information, view our product selection table.

How do I install the Aquafighter?

The Aquafighter fuel tank water absorber is designed to be lowered directly to the bottom of the fuel tank, and that the cord is secured outside of the tank for easy retrieval for inspection and replacement. For full instructions click here.

Resale and volume discounts are available. Send us a trade enquiry to receive your quotation today.

Apply for a credit account today to receive our exclusive benefit for trade customers only.

You may also be interested in

Aquafighter Finger Fuel Tank Water Absorber
  • D
  • K
  • HVO/GTL

Aquafighter Finger Fuel Tank Water Absorber

For agricultural and plant equipment tanks

£41.60 ex. VAT

View product
Aquafighter Snake Fuel Tank Water Absorber
  • D
  • K
  • HVO/GTL

Aquafighter Snake Fuel Tank Water Absorber

For boats, storage tanks up to 1500l and genset belly tanks

from

£50.45 ex. VAT

View product
Aquafighter Medium Canvas Fuel Tank Water Absorber
  • D
  • K
  • HVO/GTL

Aquafighter Canvas Fuel Tank Water Absorber

For bulk fuel storage tanks up to 10,000l

from

£77.00 ex. VAT

View product
FUELSTAT Fuel Contamination Test Kit
  • D
  • HVO/GTL

FUELSTAT Fuel Contamination Test Kit

Fuel Contamination Test Kit for Microbial Contamination and Diesel Bug

£135.65 ex. VAT

View product