ZVA Automatic AdBlue Magnetic Nozzle

40ltrs Per Min (Auto)

ZVA Automatic AdBlue Magnetic Nozzle

ZVA AdBlue Nozzle

Image may vary depending on product model

Select image to zoom



ex. VAT


  • W
  • AB
  • AdBlue
  • Air
  • Antifreeze
  • Any
  • Chemical
  • Diesel
  • Grease
  • Jet Fuel
  • Kerosene
  • Oil
  • Petrol
  • Rapsoil
  • Water
  • Windscreen
  • B2
ZVA Nozzles

Forecourt-style ZVA fuel nozzles

About the product

The ZVA Automatic AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout ZVA nozzle will only allow fluid to pass once it has been magnetically opened by the ELAFIX AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This automatic AdBlue™ nozzle is a well-known branded ZVA AdBlue™ dispensing option approved for use in heavy use, resale environments, such as those seen at the forecourt and service station. Due to these approvals it carries a higher price that than alternative AdBlue nozzle models.

Only for use with AdBlue pumps - not suitable for gravity fed installations.

Features of the ZVA Automatic AdBlue Magnetic Nozzle:

  • Automatic AdBlue™ Nozzle
  • Magnetic spout for preventing miss-filling
  • Maximum flow rate: 40ltr Per Min
  • Suitable for urea and water
  • Supplied with ¾” Hose Barb Swivel
  • Approved for use in resale systems
  • Must be used with ELAFIX 40 adaptor

Product Models and Features

F00619040ZVA Automatic Magnetic AdBlue™ Nozzle

Max Flow Rate (lpm) - 40

Max Pressure (Bar) - 3.5

Spout OD (mm) - 19

Inlet - 3/4" Hose Barb Swivel


AdBlue and Water

£979.20 ex. VAT

Product Accessories


Elafix 40 AdBlue™ Magnetic Tank Adaptor

19mm OD

Compatible to ISO22241-3

Working Temp: -20°C to +85°C

Weight: 65g

For use with AdBlue magnetic nozzles

£45.45 ex. VAT

Nozzle Override Magnetic Adaptor

Fits over a magnetic spout to allow it to dispense when not in contact with a vehicle tank magnetic adaptor e.g. when filling a smaller container or if you have some vehicles with a tank adaptor and some without.

£28.75 ex. VAT

Scroll left and right to view table

How do I know if my vehicle has the magnetic tank adaptor fitted?

Newly manufactured vehicles which use AdBlue™ should have had a AdBlue™ tank magnet incorporated into the fill point at the manufacturing stage. To check whether you already have an magnetic adaptor in your vehicle, hold something magnetic next to the AdBlue™ filler neck and if see you feel a magnetic pull. If there isn’t a magnetic pull, you will need to fit a Elafix AdBlue™ magnetic tank adaptor to reap the benefits of this ZVA magnetic AdBlue™ nozzle.

I have some vehicles with magnet and some without, can I still use the magnetic AdBlue nozzle?

You have two options here. Our recommendation is that you buy the AdBlue tank magnetic adaptors for all remaining vehicles. Alternatively, you can buy the nozzle override adaptor which fits over your magnetic AdBlue nozzle spout to fool it into thinking it is in contact with a magnetic vehicle adaptor. However, this option puts you at risk of costly miss-filling, not just the vehicles without the AdBlue magnetic adaptor, but also the ones with it if you accidentally leave the override adaptor on when refilling those too.

See accessories table for both options.

Can I just use a diesel nozzle to refill my vehicle with AdBlue?

No! You should strictly only ever use equipment designed for use with AdBlue, as these will be constructed of compatible materials such as stainless steel and polypropylene. AdBlue will cause many materials to corrode e.g. cast iron, which most fuel nozzles are manufactured of. This will not only cause your nozzle to fail but will also contaminate the AdBlue which must be kept completely pure to ensure there is no damage to the vehicle’s SCR system.

Can I use this nozzle with a gravity hose kit?

Only manual nozzles can be used within gravity fed installations, as the back pressure required for an automatic nozzle to open is unlikely to ever be achieved under gravity conditions. For this reason, gravity hose kits are always supplied with manual nozzles.

If you are buying for resale and have volume enquiries, contact our sales team for pricing by clicking on the below product enquiry button or calling us on +44 (0) 121 351 4445.

Alternatively, visit our trade customers page where you can download account forms to apply for a credit account and receive exclusive trade benefits if approved including trade pricing.

You may also be interested in

Piusi Stainless Steel AdBlue™ Nozzle
  • W
  • C
  • AB

Piusi Stainless Steel Automatic AdBlue Nozzle

60ltrs Per Min (Auto)


£314.45 ex. VAT

View product
Elafix 40 Magnetic Vehicle Tank Adaptor
  • W
  • AB

Elafix 40 AdBlue Magnetic Adaptor

Use with Magnetic AdBlue Nozzle

£45.45 ex. VAT

View product
Piusi SB325 AdBlue Nozzle c/w Breakaway Spout
  • W
  • C
  • AB

Piusi SB325_X Automatic AdBlue Magnetic Nozzle

45ltrs Per Min (Auto)


£272.30 ex. VAT

View product
Piusi SB325_X AdBlue Nozzle c/w Meter & Breakaway Spout
  • W
  • C
  • AB

Piusi SB325_X Automatic AdBlue Magnetic Nozzle c/w Meter

45ltrs Per Min (Auto)

£452.60 ex. VAT

View product