Cim-Tek 70024 Hydroglass Bio Fuel Tank Filter
100 Ltrs Per Min (10 micron)
- Jet Fuel
Hydrosorb & Hydroglass Cim-Tek fuel filters
About the product
The Cim-Tek Hydroglass Fuel Tank Filter is designed to remove water and particles up to 10 micron, especially for use with biodiesel or fuel with a high bio content. Unlike the Hydrosorb filters which use a paper element, the Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel filter also benefits from a higher dirt holding capacity which results in longer element life.
These fuel storage tank filters have a spin on cannister element, enabling the fuel filter element to be easily removed and replaced once it becomes full. Cim-Tek Hydroglass fuel tank filter includes two parts, static filter adapter (head) and an element. The All Cim-Tek filter components, including the replacement Cim-Tek 70024 element, are available individually as replacements (see accessories table).
The Cim-Tek 70024 fuel tank filter is designed for higher flow rate pump systems up to 100lpm. If a lower flow filter would be more suitable for your application, see the 70236 in the related products.
Features of the Cim-Tek 70024 Hydroglass Bio Fuel Tank Filter:
- 10 micron Cim Tek cannister filter
- Maximum flow rate of 100 Ltrs Per Min
- 1” F BSP Flanged Inlet/Outlet
- 1 1/2"-16 F UNF Filter Thread
- For diesel & biodiesel up to B100
- Cim-Tek part code: 70024
- Includes 1 x filter head and 1 x filter element
Product Models and Features
|F00611C10||Cim Tek 70024 Bio Fuel Filter Complete|
10 Micron Particle and Water Filter
Application - Pump
Max Flow Rate (lpm) - 100l
Pressure (bar) - 3.4
Inlet/Outlet - 1" F Flanged BSP
Filter Thread - 1 1/2"-16 F UNF
|£173.05 ex. VAT|
Cim Tek 70024 Fuel Filter Element Only
|£119.55 ex. VAT|
Replacement Head - over to 80 (lpm)
|£57.80 ex. VAT|
Scroll left and right to view table
Why do I need a fuel tank filter?
The increasing bio-content in today’s diesel means that the fuel in storage tanks often contains small, but problematic water levels which can cause a nasty sludge to appear. Water contamination is usually one of the main reasons for costly damage to vehicle engines and reduced fuel efficiency, but an effective water filter can be one of the best ways to prevent this. The water tank filter removes any free water from the dispensed fuel, which protects your vehicle engine from failure. Whiles this filter can get a range of particles, you should also consider a particle fuel filter for removing particles down to finer microns. View our particle fuel tank filter here.
How long should a fuel filter last before I need to replace the element?
Unfortunately, there is no exact answer to this question as it all depends on the level of contamination in your fuel. The dirtier the fuel in your tank, the quicker the filter will get full. We advise that you always have a spare filter element on-site so that you experience no downtime if your filter is full and blocks.
If you’re experiencing your filter elements blocking a lot quicker than usual, then this may be down to changes in the bio content of diesel. Read our article to find out more. In this case, we recommend considering fuel tank water absorber such as Aquafighter that removes both free and emulsified water directly from the fuel tank.
Why is it important to know your pump flow rate when choosing your filter?
If your pump is too fast for the maximum flow rate of the filter, the filter will keep blocking leaving you unable to dispense. This may also result in the pump running in partial bypass, causing premature wear on the pump vanes and windings. In extreme cases where you have say a 50lpm filter being used with a 150lpm pump, it may even blow the filter element inside rendering it useless. Therefore, if your pump is 70lpm, your filter must be able to cope with at least that.
If you are buying for resale and have volume enquiries, contact our sales team for pricing by clicking on the below product enquiry button or calling us on +44 (0) 121 351 4445.
Alternatively, visit our trade customers page where you can download account forms to apply for a credit account and receive exclusive trade benefits if approved including trade pricing.
You may also be interested in
GoldenRod 497 BIO-FLO Fuel Tank Filter
95 Ltrs Per Min (10 micron)
£107.45 ex. VAT
Cim-Tek 70236 Hydroglass Bio Fuel Tank Filter
70 Ltrs Per Min (10 micron)
£98.60 ex. VAT
Aquafighter Snake Fuel Tank Water Absorber
For industrial machines, boats and genset belly tanks
£82.70 ex. VAT
Aquafighter Anaconda Fuel Tank Water Absorber
For fuel storage tanks up to 10,000l with small openings
£132.00 ex. VAT