Aquafighter Finger Fuel Tank Water Absorber
For agricultural and plant equipment tanks
- Jet Fuel
The Official UK agent of Aquafighter fuel tank water absorber
About the product
The Aquafighter Finger is a fuel tank water absorber designed to remove both the free and suspended/emulsified water from fuel tanks onboard small industrial machines, agricultural machinery and plant equipment when they are not in use.
With the increasing bio content in diesel, water contamination is one of the largest causes of engine damage, as it causes microbial growth that results in a nasty sludge responsible for filter blockages, equipment damage, engine corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only absorbs free water but separates and captures the suspended emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment.
By acting in this way, the Aquafighter Finger fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement requirements and the need for a regular tank cleaning, and protecting the tank from corrosion.
Understand more about the problem of water in your fuel and Aquafighter as a complete solution here.
Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.
Features of the Aquafighter Finger Fuel Tank Water Absorber:
- Captures and removes free and emulsified water directly in the tank
- Other products on the market absorb only free water.
- Prevents diesel bug from forming
- Reduces filter replacement by around 60%
- Eliminates the need for most additives
- Reduce water level down to 75ppm to meet the EN590 diesel fuel standards
- For fuel tanks with a capacity of up to 150litres and with openings between 3.8cm and 9cm.
- Size: 20cm x 4cm
- Absorbs up to 200ml
- Suitable for diesel, kerosene, biofuel and heating oil
Product Models and Features
|AQU999020||Aquafighter Finger 999.020 Fuel Tank Water Absorber|
Size: 20cm x 4cm
Absorbs up to 200ml
For fuel tanks with a capacity of up to 150litres and with openings between 3.8cm and 9cm.
Suitable for diesel, kerosene, biofuel and heating oil
Reduce water level down to 75ppm to meet the EN590 diesel fuel standards
|£42.70 ex. VAT|
How do I use the Aquafighter?
The Aquafighter Finger is small enough to be added directly into the fill point of a piece of agricultural or plant machinery. You can leave it to absorb the water content in the fuel whilst the engine is not running, and remove it when it is. This makes it ideal for ensuring fuel is kept water-free when equipment is not in use.
What do you mean by suspended and emulsified water? Is this different to free water?
Suspended water is bound to the fuel molecules making it appear cloudy, as opposed to free water that presents itself as a separate layer to the fuel at the bottom of the tank. Under pressure changes and agitation, often experienced as the fuel passes through pumps and filters, water can become fully emulsified in fuel which sees it turning from cloudy to milky. This is where there is almost no separation between the fuel molecules and water content.
What is the difference between Aquafighter and other fuel tank water absorbers?
Aquafighter is fuel tank water absorber that removes both free, suspended and emulsified water in the fuel providing a complete solution to water contamination. Aquafighter ensures that your fuel tank is water-free all the time by absorbing the free water and separating and capturing suspended water that makes the fuel looks cloudy. On the other hand, other diesel and oil tank water absorbers on the market can remove only free water, solving half of the problem.
Can Aquafighter clean a dirty fuel tank?
Aquafighter fuel tank water absorbers can remove free and bound water level down to 70ppm (exceeding refinery spec). However, if you have a problem with seriously contaminated fuel with a large quantity of particles, dirt and bacteria, then Aquafighter fuel tank water absorber cannot improve the quality of considerably spoilt diesel fuel. In the event of considerably dirty fuel, we recommend considering professionally cleaning your fuel and tank and then start using Aquafighter to prevent problems with water contamination in the future.
What makes Aquafighter water absorber better than any additives on the market?
Aquafighter fuel tank water absorber is designed to keep your fuel water-free, preventing water contamination and diesel bug growth. Additives usually only treat the symptoms caused by water present in the fuel without solving the actual problem. Also, the diesel tank water absorber does not simply “absorb” water, but separates and captures it, which can save you money and time in repairing damaged equipment.
How long does an Aquafighter tank water absorber last?
Unfortunately, there is no straight answer to this question as Aquafighter water absorber can be influenced by factors such as how bad the fuel is contaminated, high humidity, leaks that require you to replace the tank water absorber more often. You can however retrieve Aquafighter at any time to check whether it appears full.
Should I worry about the Aquafighter expanding too much?
No. The Aquafighter fabric membrane is designed to resist expansion even when full. This is designed so that there is zero risk of removing it from the tank when it is full.
Is there a proof the Aquafighter diesel tank water absorber works?
The efficiency of the fuel tank water absorber has been tested over 7000 times by two of the largest fuel producers in the world and at the renown Saybolt Laboratories in Sweden. In every test sample, the results show that Aquafighter water absorber removes bound water to less than 70ppm. This and many more satisfied customers prove the Aquafighter is a perfect solution for water contamination in fuel.
Don't just take our word, learn more about how Aquafighter diesel tank water absorber can help you keep your fuel tank water-free, click here to read the product guide.
If you are buying for resale and have volume enquiries, contact our sales team for pricing by clicking on the below product enquiry button or calling us on +44 (0) 121 351 4445.
Alternatively, visit our trade customers page where you can download account forms to apply for a credit account and receive exclusive trade benefits if approved including trade pricing.
You may also be interested in
Cim-Tek Tank Dryer
Removes water from diesel, fuel, oil and biofuel
£14.60 ex. VAT
Aquafighter Snake Fuel Tank Water Absorber
For industrial machines, boats and genset belly tanks
£82.70 ex. VAT
Aquafighter Anaconda Fuel Tank Water Absorber
For fuel storage tanks up to 10,000l with small openings
£132.00 ex. VAT
Aquafighter Canvas Fuel Tank Water Absorber
For bulk fuel tanks up to 10000l
£78.00 ex. VAT