Push Button Oil Tank Sight Level Gauge

For bottom outlet tanks

Push Button Oil Tank Sight Level Gauge

Push Button Oil Tank Gauge

Image may vary depending on product model

Select image to zoom

From

£38.55

ex. VAT

Fluids

  • O
  • D
  • K
  • HVO/GTL
  • AdBlue
  • Air
  • Antifreeze
  • Any
  • Chemical
  • Diesel
  • Grease
  • Jet Fuel
  • Kerosene
  • Oil
  • Petrol
  • Rapsoil
  • HVO/GTL
  • Water
  • Windscreen

About the product

The Push Button Oil Tank Sight Gauge is a traditional, economical model of heating oil tank gauge, primarily installed on domestic tanks. It works via a simple push to read button, which when pressed, the oil tank level indicator provides the user with an immediate visual indication of the tank’s contents. This oil tank level gauge is constructed of a quality, corrosion resistant zinc plated brass and is suitable for use on both steel and plastic bottom outlet fuel tanks. A user friendly benefit of this fuel tank gauge is that it remains isolated when the button is released.

Features of the Push Button Oil Tank Sight Level Gauge:

  • Bottom outlet oil tank gauge
  • Corrosion resistant zinc plated brass body
  • ½” M BSP inlet
  • Available in 4ft & 6ft
  • Available individually or in packs of 15

Product Models and Features

CodeModelDescriptionPrice
PB1204Push Button Oil Tank Sight Gauge 4ft x 1⁄2"

Tank Height (ft/mm): 4'0/1219

Inlet: 1/2" M BSP

Outlet: 1/2" F BSP

Tube Support: Aluminium

Tubing: PVC

£38.55 ex. VAT
PB1204-15Push Button Oil Tank Sight Gauge 4ft x 1⁄2" - Pack of 15

Tank Height (ft/mm): 4'0/1219

Inlet: 1/2" M BSP

Outlet: 1/2" F BSP

Tube Support: Aluminium

Tubing: PVC

Pack of 15. Buying in bulk will give you a larger cost saving as each piece will cost £24.65 instead of £38.55

£369.75 ex. VAT
PB1206Push Button Oil Tank Sight Gauge 6ft x 1⁄2"

Tank Height (ft/mm): 6'0/1828

Inlet: 1/2" M BSP

Outlet: 1/2" F BSP

Tube Support: Aluminium

Tubing: PVC

£43.40 ex. VAT
PB1206-15Push Button Oil Tank Sight Gauge 6ft x 1⁄2" - Pack of 15

Tank Height (ft/mm): 6'0/1828

Inlet: 1/2" M BSP

Outlet: 1/2" F BSP

Tube Support: Aluminium

Tubing: PVC

Pack of 15. Buying in bulk will give you a larger cost saving as each piece will cost £29.50 instead of £43.40

£442.50 ex. VAT

Product Accessories

CodeAccessoryPrice
KAL9000

Threaded Connector 1" M BSPT x 1⁄2" F BSP - Aluminium 90mm

£5.65 ex. VAT
SG1003

Oil Tank Sight Gauge PVC Tubing 30mtr Coil

£52.50 ex. VAT

Scroll left and right to view table

How does this heating oil tank gauge work?

The oil tank sight gauge works using the gravity effect on fluids to give visual representation of the tank level. This heating oil tank gauge uses either a push or pull to read button or handle to only open the valve until the fluid level has settled. When you let go of the button or handle it goes back to a closed position. This means that next time a level needs to be taken the button or handle needs to be activated again. However, when checking the heating oil thank level the sight gauge valve has to be naturally closed to ensure against leaks in case the tube is damaged.

Can I use an oil tank sight gauge on a plastic heating oil tank?

The simple answer is yes you can. When installing the oil tank sight gauge on a plastic tank that has a recessed outlet point you will have to fit an extension before the sight gauge to bring the tube flush with the outside of the tank, so it doesn’t bend around the outside of the tank.

How accurate are oil tank sight gauges?

This oil tank sight gauge/ oil tank float gauge is cost effective and provide a good ideation of the content levels, but it is not as accurate as some of the more sophisticated tank gauges. If a higher level of accuracy is desired you might need to consider some of our more advanced models such as Unitel gauge suitable for both diesel fuel and oil heating, Piusi Ocio fuel tank gauge perfect solution for diesel and Apollo oil heating tank gauge for heating oil.

If you are buying for resale and have volume enquiries, contact our sales team for pricing by clicking on the below product enquiry button or calling us on +44 (0) 121 351 4445.

Alternatively, visit our trade customers page where you can download account forms to apply for a credit account and receive exclusive trade benefits if approved including trade pricing.

You may also be interested in

Apollo Standard Oil Tank Gauge
  • O
  • D
  • AB
  • K
  • HVO/GTL

Apollo Ultrasonic Heating Oil Tank Gauge

Ultrasonic (For oil heating)

from

£173.95 ex. VAT

View product
Gem Oil Tank Gauge
  • O
  • D
  • K
  • HVO/GTL

Gem Oil Tank Sight Level Gauge

For bottom outlet tanks

£81.75 ex. VAT

View product