Piusi CF100 Particle Fuel Tank Filter

Why do I need a fuel tank filter?

Once stored fuel can easily become contaminated by numerous factors such as dirt, small metal particles and other abrasive components. These particles in your fuel can cause damage for your pump as well as serious engine problems and result in costly downtime, repairs and inconvenience. This fuel tank filter will help prevent all of these from happening because it filters the dispensed fuel and separates the particles. As part of the fuel filtration, you should also consider water contamination, and Piusi CFD 150-30 water tank filter can be the perfect solution for this common issue

How long should a fuel filter last before I need to replace the element?

Unfortunately, there is no exact answer to this question as it all depends on the level of contamination in your fuel. The dirtier the fuel in your tank, the quicker the filter will get full. We advise that you always have a spare filter element on site so that you experience no downtime if your filter is full and blocks.

If you’re experiencing your filter elements blocking a lot quicker than usual, then this may be down to changes in the bio content of diesel. Read our article to find out more.

Why is it important to know your pump flow rate when choosing your filter?

If your pump is too fast for the maximum flow rate of the filter, the filter will keep blocking leaving you unable to dispense. This may also result in the pump running in partial bypass, causing premature wear on the pump vanes and windings. In extreme cases where you have say a 50lpm filter being used with a 150lpm pump, it may even blow the filter element inside rendering it useless. Therefore, if your pump is 70lpm, your filter must be able to cope with atleast that.