Goldenrod Filters are available for both removing particles and removing water. The particle unit has a 10 micron filtration for rust, sand, dirt, scale and lint. The water absorbing unit removes water from diesel fuel and has a 15 micron filtration. Spare elements and accessories are available(see catalogue page for further information).
Cartridge filters with water-absorbing Oil/water separating filter.
The delivery filter is a water-absorbing cartridge. This provides extra protection for engines that are refuelled at the station. These filters separate and absorb any water that may be found in the diesel fuel. The absorption of water gradually reduces the filtering capacity and increases the head loss caused by the filter. The filter must be replaced when it becomes saturated.
Spin-on cartridge line filters can be applied either on the suction side or the flow-back side of hydraulic or lubricating systems. They are available with 3/4" or 1" fittings.
Characteristics:
• Filtering capacity 10 µm
• Flow rate 60 - 100 l/min
• Operating pressure 12 bar max
Bio-Tek Filter for removal of particles in concentrated Bio Fuels being pumped at up to 80 litres per min, it has a 1 micron filtration with an operating pressure of 3.4 bar. Suitable for a mix of E20-E100 (E20=20% Ethanol and 80% Petrol).
Bio-Tek Filter for removal of water and particles out of Bio Fuels on the outlet of pumps up to 80 litres per min. it has a 10 micron filter for use with a B20 mix only. (B20=20% Bio and 80% Diesel).
1 ½” BSPF heavy duty aluminium bowl filter c/w drain plug. 180 micron stainless steel basket strainer. For pumps up to 300 litres per min, max pressure 6.5 bar.
