Currently Viewing - STORAGE TANK EQUIPMENT - Click links below for detailed section information • • TANK ALARMS & OVERFILL PREVENTION • • GAUGES • • FILL POINT & VENT EQUIPMENT • • • • FUEL TANK FILTERS • •   Technical Specs   Catalogue Page   Float Type Clock Gauges      Direct mounting level gauge calibrated ¼, ½, ¾, full; fully adjustable and easy to fit. Ideal low-cost for domestic oil heating applications; can also be used for water tanks, available in 2ft, 3ft, 4ft, 5ft, 6ft, 8ft, 0-6ft adjustable.     Technical Specs   Catalogue Page   Float Type MTF2000 Clock Gauge      Direct mounting contents gauge, easily adjustable over the range 900mm to 1950mm range with 1½” and 2” BSP connections calibrated 0-100%. Low cost and easy to fit. Suitable for light fuel oils and inert liquids e.g. water.     Technical Specs   Catalogue Page   Unitel Tank Level Gauge      Unitel Hydrostatic gauge is designed to read the level in a tank remotely, it measuring features are 0-100%. The gauge comes in either a 10mtr or 20mtr version. It is suitable for tanks between 900mm and 3000mm high cylindrical or retangular. 50mtr max remote distance.     Technical Specs   Catalogue Page   Tank Questionnaire   Unitop Tank Level Gauge      Unitop Hydrostatic gauge is designed to read the level in a tank remotely, it measuring features are litres. The gauge comes in either a 10mtr or 20mtr version (longer on request). It is suitable for tanks between 900mm and 3000mm high cylindrical or rectangular. 50mtr max remote distance(download setup questionnaire).     Technical Specs   Catalogue Page   Tank Questionnaire   Normond Hydrostatic Gauge      For tanks up to 3m deep. "C" Series 6" Calibrated gauge includes 10m of capillary tubing and probe For tanks 3-9m deep, rigid balance chambers are recommended - POA     Technical Specs   Tank Questionnaire   Normond G Series Gauge      The Normond series of Analogue Gauges are popular choices for commercial sites. Featuring a handpump mechanism the gauges do not require any power and are therefore ideally suited for hazardous environments. The G series is the most accurate of the Normond Gauges and suitable for most liquids (excluding foods). Robust and weather-resistant these gauges can be relied upon to consistently perform for many years and require little maintenance. • For most liquids including fuel and chemicals • Suitable for hazardous environments • Caters for tanks with difficult access & up to 10m high • Large format dials for easy reading • Weather-resistant • Simple to install • Highly reliable with thousands installed     Technical Specs   Catalogue Page   Ocio Electronic Tank Level Indicator      Continuous monitoring system OCIO is an innovative system for monitoring the fluid level inside atmospheric tanks. The system detects the static pressure generated by the fluid height by means of a tube inserted in the tank and displays the fluid level or volume. The new design and suitable solutions guarantee a reliable and repeated level indication. The system is composed of: • A pipe for detecting the static pressure. The tube with its end is inserted from the top of the tank and dipped in the fluid down to the bottom of the tank. • A control unit for level display and system management. The unit is provided with intuitive and complete software and allows the connection of two alarm or lock devices. By means of the software it is possible to: - set the type and the dimensions of the tank - define the level alarms - define the level indication - define the unit of measurement - calibrate the instrument Depending on the set alarm levels, the control unit activates or deactivates the contact working as a remote switch starting the alarm devices or cutting the power supply off the connected equipment.     Technical Specs   Catalogue Page   Ocio Electronic Desk      OCIO is available with direct linkup to PC PIUSI provides a solution to the growing demand for methods of remote control of tank levels. A new interface lets you connect up to 12 OCIO level gauges and send data via PC cable for a distance of up to 1000 metres. Software performance A mask permits displaying data relating to level, volume, % of contained volume on the PC monitor. A dedicated software has been developed that permits saving the historical tank level records according to different principles: • at each time interval • at each level change • at each volume change. With the recorded data, a diagram can be displayed showing the historical tank level records. Tank configuration The software permits the configuration of every type of tank. Besides the standard tank, cylindrical or cubic, any shape can be set. By selecting “Customer Tank” the tank information table can be compiled up to 1000 points. Alarm configuration 2 alarms are available. These can be configured through the software.     Technical Specs   Catalogue Page   Ocio GSM Tank Level Transmission      GSM Tank level transmission This system responds to a demand for the remote monitoring of tank levels, displaying the current situation on a telephone display or at an e-mail address. Advantages The system can be used in all situations which require level monitoring without the need to be physically present, leading to timesaving and guaranteed reading in all situations. Alarm messages are sent straight to the supplier or plant maintenance technician responsible for tank filling or emptying, for example, used fluid disposal.     Technical Specs   Catalogue Page   Apollo Ultrasonic Oil Level Monitor      The Apollo Ultrasonic Oil Level Monitor, the universal oil tank monitoring system · The reliable way to check your oil. · High quality FM systems. · Reads the oil level in your tank and sends to an indoor receiver. · Universal - One Size Fits All Tanks. · Easy to install, no drilling or cutting tubes. · Show level of fuel in your tank as a 10 bar display. · Transmits level up to 200mtr away. · Proven long life lithium battery. · Totally sealed unit & Simple Retro Fitting.     Technical Specs   Catalogue Page   Monoscan Ultrasonic Gauge      Monoscan is an ultrasonic level measuring instrument for direct installation on tanks, vessels and reactors. It is a loop powered 4-20ma device with integral lcd display. Constructed of an ABS body, it features a senor with a diameter of just 2” thread. Monoscan is an excellent choice for measuring the level of liquids and solids at ranges of up to 15mtrs with a 0.25% accuracy of the measuring range. Monoscan is the smalles ultrasonic gauging device for measuring open channel flow incorporating 9 predefined types of weirs and flumes in its memory that assures fast and easy setup. • Direct Installation on tanks, vessels and reactors • Self-calibrating to virtually all types of conditions • Full compensation in virtually all environments • Delivers highest accuracy even under problematic conditions • Maintenance free     Technical Specs   Catalogue Page   Smartscan 50 Ultrasonic Gauge      The Smartscan is an ultrasonic level measuring instrument for installation in process tanks, storage vessels, open air piles, and more. It is a 4 wire low voltage device with customized graphic lcd display. Excellent for measuring liquids up to 12mtrs with better than 0.25% accuracy of the measuring range. The radar like performance makes the Smartscan a unique cost saving solution for accurate measuring. • Operating pressure up to 5 bar • Operating temperature -40 to 100°C • Max sensor to instrument distance 200 metres     Technical Specs   Catalogue Page   Push Button Sight Gauge      ½” BSP Push Button Sight Gauges are available in 4ft and 6ft lengths as standard(other lengths available on request) they have an aluminum support and come complete with all fittings to make it ready to use. We also offer a version with plastic support.     Technical Specs   Catalogue Page   Royal Push Button Sight Gauge      ½” BSP Royal Push Button Sight Gauges come c/w filter and a dual isolation system, they are available with 4ft or 6ft aluminum supports with a 4ft 6 plastic support option.     Technical Specs   Catalogue Page   Sight Gauge Accessories      A Range of Sight Gauge Accessories are available e.g Plastic tank extensions, Sight Gauge level marker kits and PVC sight tubing.     Technical Specs   Catalogue Page   Gem 2 Alloy Bowl Sight Gauge      All in one Gem tank level gauge incorporates an oil filter and isolating valve in one easy-to-fit compact unit. The Gem gauge fits all standard steel and plastic tanks. It is available in ½” fittings and can be supplied in either 4ft 6” c/w plastic support and 6ft and 8ft aluminium support.

Site Map