CTS Tank alarms can be supplied in both mains voltage or battery, they are designed to identify and avoid oil spillages and to assist with fuel re-ordering and bund leaks. They are available in all types of configurations to suit your individual requirements. As spillages and leakages can be expensive they are designed to help you combat these issues. (see catalogue and spec pages for further information).
The CTS liquid level sensor is manufactured in the UK as a single assemble so that the fluid ingress is almost impossible. It is constructed of a nylon float and shaft to ensure that the float will operate in a large range of liquids in extreme temperatures. The weight and the 1 ½ cap are both brass to give the product the strength and the durability that is required on most installations. (see catalogue page for further technical information).
2" Overfill Prevention device for storage installations of liquid petroleum products, fully automatic operation for use with pumped or gravity installations, Max flow rate 650 litres per min. Complies with KIWA evaluation guideline BRL-K636.(see catalogue page for further information).
3" Solo Overfill Prevention Valve designed for above ground or underground storage tanks, suitable for use with pumped or gravity installations. Max flow rate 1000 litres per min. For use with Diesel, Super, Unleaded. To be fitted directly under manhole cover(see catalogue page for further information).
