Displacement, self-priming, rotary electric vane pumps for the transfer of diesel fuel equipped with by-pass valve.
Powerful, dependable and economical, they are available with 12 and 24-volt direct current motors.
Thanks to their compact size, ease of installation, dependability and safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
Cast iron pump body finished with anti-corrosion paint.
Vane pump with sintered steel rotor and acetal resin vanes.
By-pass valve incorporated in the pump body.
Direct current brush motor with permanent magnet stator.
Motor protection grade IP55.
Used in intermittent service with 30-minute work cycles.
Pump attachment support bracket.
Available in a carry box and as a kit with hose and nozzle
The all new DC pump for plant equipment featuring new innovations in design and compact in size, incorporating a new level of pump intelligence allowing the pump to monitor its own activity and performance.
Studies have shown that, in the majority of cases, fuel-transfer pumps break down because of improper handling by users, including excessive or extreme use, accidental start-ups, or simple carelessness, that can leave the pump running for hours on end.
Breakdowns translate into loss of time and money while waiting for the pump to be repaired.
These difficulties are overcome with VANTAGE.
Thanks to new, internationally patented technology, VANTAGE automatically prevents situations from becoming critical.
Pump body in cast iron with anti-corrosion treatment.
Support base, completely flexible for different installation.
Vane type pump with sintered steel rotor and acetalic resin vanes.
IN/OUT with hose tail connection for 1 hose, flexible for different customised solution.
DC brushes motor with permanent magnets.
Protection IP55.
Continuous duty electric motor fully protected by amperage and temperature.
ON/OFF switch integrated with remote option.
Direct connection to level switch.
LEDs for working status monitoring.
Local file with events memory.
Made to complete the Panther range for transferring diesel fuel, these pumps are of the rotary vane type, self-priming, with high flow rate and easy operation and installation.
Besides featuring an integrated bypass valve and suction filter, they are also equipped with a mechanical seal that ensures a high standard of reliability even at low operating temperatures.
The version 24/12 can be used with both tension.
Compact, safe and reliable, they can be fitted to earthmoving machines, mobile dispensers on motor vehicles and fixed dispensers in case only battery power is available.
Pump body in cast iron with anti-corrosion treatment and painting.
Support base.
Pump of the blade type with sintered steel rotor and acetalic resin vanes.
Mechanical seal.
Incorporated bypass valve.
D.C. motor with brushes and permanent magnets.
Connector block with ON/OFF switch.
Protection fuse.
Degree of protection IP55.
Filter 100 ΅ incorporated in pump body, easy access for maintenance.
Threaded 1 coupling directly on pump body. overload protection.
1" flanged connectors, external filter.
Displacement, self-priming, rotary electric vane pumps for transferring diesel fuel, characterized by high flow rates.
All pumps are equipped with by-pass valve.
Powerful, dependable and economical, they are available in 12 and 24-volt versions.
Thanks to their compact size, ease of installation, dependability and safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
Cast iron pump body finished with anti-corrosion paint.
Vane pump with sintered steel rotor and acetal resin vanes.
By-pass valve incorporated in the pump body.
Direct current brush motor with permanent magnet stator.
Motor protection grade IP55.
Used in intermittent service with 30-minute work cycles.
Pump attachment support bracket.
Integrated on/off switch.
Flanged 1" connectors.
Available with power cables, incorporated fuses and pincers for connection to terminal strips.
A new and complete range of pumps for transferring and delivering oil, operated by direct current motors.
The pumps are especially designed for transferring oil from drums, or mobile tanks, in situations where electricity or pneumatic connections are not available.
The motor is equipped with a direct current battery so that oil transfer or delivery operations can always be carried out.
Use the pressure-switch version to deliver oil without the inconvenience of having to start or stop the pump.
Thanks to their compactness and easy installation these pumps can be used for equipping mobile oil pumps on vehicles or used independently with battery equipped trolleys.
They can also be used as primary installations when carrying out oil transfer or handling operations in yards, ports, aboard vehicles or boats.
Performance
Flow rate from 5 to 10 l/min (1,4 to 2,8 gal/min)
Operating pressure from 5 to 10 bar (70 to 140 psi)
Oil viscosity up to 2000 cSt
Duty cycle 30 min
Noise less than 65 Db
