Currently Viewing - OIL HEATING EQUIPMENT - Click links below for detailed section information • • DE-AERATORS • • OIL FLOW METERS • • OIL HEATING ACCESSORIES • • • • FIRE VALVES • • GAUGES • • OIL LINES & FITTINGS • •   Technical Specs   Catalogue Page   Alloy FxF Bowl Oil Filter      Alloy F x F bowl type oil filters with thread sizes of 1/4" BSP, 3/8" BSP & 1/2" BSP • pressure tested 2 bar • max working temp. alloy bowl 90oc • max working temp. transparent bowl 50oc     Technical Specs   Catalogue Page   Oil Check Valve      3/8" female brass body c/w 8mm - 10mm pipe connection                    Technical Specs   Catalogue Page   Oil Tank Anti-Siphon Device      Designed for use on top entry tanks as a safety device to prevent the oil siphoning effect should an oil leak occur. Tank height must be between 0.1 - 3 mtrs.     Technical Specs   Catalogue Page   Pressure Reducing Valve      For use on pumped, multiple appliance or systems with a head over 40 mtrs. Technical Specification • inlet and outlet 3/8" • pressure gauge port 1/4" • maximum flow rate in excess of 22.50 l/h • pressure ratings - inlet: 20 bar max, outlet: 0.15 - 1.7 bar.     Technical Specs   Catalogue Page   GOK Pressure Regulator      For use on single appliance gravity fed systems with a head range of 2mtrs – 30mtrs. Technical Specification • connections 10mm compression • pressure rating inlet: 0.5 - 6 bar outlet: 100 mbar • flow rate up to 20l/h     Technical Specs   Catalogue Page   Questionnaire   Taisan Oil Lifter      Domestic oil lift pump designed to supply kerosene to one or more heating appliances with the oil tank situated up to 8 metres lower than the pump. • solenoid pump to suit 8mm od supply pipe • 350ml reservoir c/w 4 position float switch • oil inlet filter • outlet shut-off valve • 8 mtrs suction lift max:- 6 l/h at 8 mtrs, - 12 l/h at 2 mtrs Please view suitability questionnaire     Technical Specs   Catalogue Page   Oil Pressure Testing Kit      Designed for the engineer to commission a burner’s oil pressure correctly. The kit contains two gauges various adaptors and high pressure hose.     Technical Specs   Catalogue Page   Sealents for Fuels      We offer a range of thread sealants and storage tank related pastes for use with most CTS products supplied. (see catalogue page for further details) • Heldite • Teflon Sealant • P.T.F.E Tape • Water Finding Paste • Ullage Paste • Lockseal Strong Sealant     Technical Specs   Catalogue Page   Saugfix Priming Pump with Vacuum Tank      • For priming oil lines using prepumped vacuum • Ideal for vacuuming motor oil out of tanks or other liquids from hard to reach areas. Tanks can be emptied into a collection tank after unscrewing the pump • tank, hose and suction needle made of high quality plastic. Pump tube and control valve made of brass with vacuum meter priming pump with vacuum tank     Technical Specs   Catalogue Page   Oil Siphon & Sludge Hand Pump      A pump designed for the removal of oil or sludge from an oil tank.           Technical Specification • max 15 litres per min delivery • inlet and outlet tube both 1400 mm long • 1.5’’ male thread for attaching onto a tank     Technical Specs   Catalogue Page   Oil Line Pressure Pump Kit      A pump designed to enable a pressure test to be carried out on oil pipework prior to the commissioning of an installation. The kit consists of a hand pump with a connecting hose and carrying case. Technical Specification • test pressure gauge range 0 - 6 bar • pressure limiter up to 4 bar test pressure     Technical Specs   Catalogue Page   Oil Suction Pump      Designed for use with top entry tanks, each pump is supplied with a suction hose for connection to the GS2000 De-Aerator or an oil filter. It also has a flexible discharge hose for draining the excess oil into a collection basin.     Technical Specs   Catalogue Page   Brigon Smoke Tester      designed for checking the combustion of an oil burner. The smoke tester comes complete with a soot scale chart, 40 filter papers and lubricating oil.

Site Map