Currently Viewing - LUBRICATION SOLUTIONS - Click links below for detailed section information • • CLEAN OIL TRANSFER SYSTEMS • • WASTE OIL TRANSFER SYSTEMS • • OIL MANAGEMENT SYSTEMS • • • • MISC SYSTEMS & ACCESSORIES • •   Technical Specs   Catalogue Page   Eolo Tyre Pressure System      Tyre pressure control system EOLO is a tyre inflator for cars and for small commercial vehicles – ideal for service stations, garages, car-body repairers and car dealers. Equipped with display and keypad for setting desired pressure; inflates and deflates. Works automatically and beeps when pressure reaches pre-set level. Features • Max inflation pressure 5 bar (73 psi, 500 kPa) • Operating temperature -10/+50 °C • User-defined units of measurement (psi,kPa,bar) • Adjustable pressure sensor     Technical Specs   Catalogue Page   Cordless Grease Gun      Heavy duty professional cordless distribution gun with rechargeable 12v battery (see technical sheet for further information) • Plastic Case • Grease Gun with flexible 750mm hose and 4 jaw nipple • 2 Batteries 12v 1300mah • Battery Charger • Filling Accessory     Technical Specs   Catalogue Page   Greaster       Grease meter nozzle GREASTER is a new dispensing nozzle for grease, equipped with an oval-gear weight meter. The flow-rate of grease nozzles depends on the specific working conditions: • resistance to the entry of new grease, which depends on many factors (conduit diameter, working temperature, possible clogging, etc.); • pump efficiency. Measuring the actual amount of grease only according to the time required for dispensing, may result in approximation errors both by defect or by excess. Thanks to GREASTER the exact amount of grease dispensed by the nozzle is no longer measured according to an empirically method, but can be accurately determined and displayed on a LCD. Thanks to its compact size and low weight GREASTER can replace normal grease dispensers, also offering the following advantages: • it guarantees the correct and exact execution of the greasing operation by displaying the resettable batch total dispensed; • it stores grease consumption by reckoning and displaying the cumulative total amount dispensed. Performances • Operating pressure: (max) 550 bar. • Burst pressure: (min) 1600 bar. • Metering accuracy: ± 3%.     Technical Specs   Catalogue Page   K200 Grease Meter      The flow-rate of grease nozzles depends on the specific working conditions: • resistance to the entry of new grease, which depends on many factors (conduit diameter, working temperature, possible clogging, etc.); M • pump efficiency.MM Measuring the actual amount of grease only according to the time required for dispensing, may result in approximation errors both by defect or by excess. Thanks to the K200 Meter the exact amount of grease dispensed by the nozzle is no longer measured according to an empirically method, but can be accurately determined and displayed on a LCD. Thanks to its compact size and low weight GREASTER can replace normal grease dispensers, also offering the following advantages: • it guarantees the correct and exact execution of the greasing operation by displaying the resettable batch total dispensed; • it stores grease consumption by reckoning and displaying the cumulative total amount dispensed. Performances • Operating pressure: (max) 550 bar. • Burst pressure: (min) 1600 bar. • Metering accuracy: ± 3%.     Technical Specs   Catalogue Page   Grease Guns & Miscellaneous      We supply a range of Grease guns which comprise of Manual Hand Operated and also Air Operated. Some small Manual Grease Pumps Dispensers also complete this range. • Hand Operated Grease Guns 400/600gr (Light Duty) • Hand Operated Grease Guns 400gr (Heavy Duty) • Air Operated Grease Guns 400gr • Portable Grease Dispenser 12kg Reservoir • High Pressure Manual Grease Pump 5kg Reservoir

Site Map