Viscotroll is the ideal product for delivering oil from a drum anywhere in the workshop. As it is powered by electricity it can be connected to any power socket thus eliminating the need for compressed air.
The group comes equipped with a self-priming gear pump and there is also a version with a pressure switch which ensures constant silent delivery and a regular no-pulse flow.
Opening and closing the delivery nozzle, on the pressure switch model, automatically causes motor ignition and shutdown.
The nozzle is installed with a flow meter and display to guarantee precise delivery operations, giving total control over the fluid used.
Performances
Flow rate 9-25 l/min (2,4 to 6,6 gal/min).
Operating pressure 6-12 bar (85 to 170 psi).
Noise levels less than 65 dB.
Oil viscosity from 10 to 2000 cSt.
Automatic ignition and shutdown with pressure switch.
K400 meter with accuracy +/- 0.5% or K33 meter with accuracy +/- 1%.
Viscotroll DC is the ideal solution for dispensing oil any time, anywhere, without using compressed air or power mains.
The unit includes a self-priming gear pump with a 12-VDC electric motor.
The built-in pressure switch allows the pump to be automatically started and stopped.
A nozzle meter monitors any dispensed quantity.
The unit has a built-in battery charger. Battery must be recharged after transferring 2/3 oil drums.
A unique solution to an ever-increasing demand from automotive transport workshops and for maintenance.
Performances
Flow rate up to 6 l/min
Noise levels less than 65 dB
Motor supply 12 Vdc
Oil viscosity from up to 2000 cSt
On demand dispensing with pressure switch
Flow meter with a meter precision of +/- 0.5 %.
The new range of VISCOMAT pumps with pressure switch is designed to satisfy requirements for deliveries with a constant flow self-priming pump with automatic switch-off at the end of delivery. The unit consists of an internal profile gear pump with alternating current motor, integrated with a pressure switch. Switch-on of the motor and delivery are performed automatically when the nozzle opens. At the end of delivery the pump continues to operate for a few seconds in order to permit topping up if necessary and then switches off.
The performance of the gear pump guarantees good flow rates with high pressures, no pulsing, regular flow and silent operation. The pressure switch activates the pump when a minimum pressure is reached and switches the pump off when a maximum pressure is reached, below the pump by-pass pressure. The pressure switch is also provided with a safety valve which limits the maximum system pressure to 10 bars.
br>The unit combines the typical characteristics of gear pumps with the simplicity and convenience of being able to activate the pump without worrying about motor switch-on and switch-off. It can be used both for feeding single delivery points, also with reels, and on fixed distribution systems.
Performances
Flow rates from 9 to 14 l/min (2,4 to 3,7 gal/min).
Operating pressures from 12 to 25 bars (170 to 355 psi).
Automatic switch-on and switch-off.
Regular no-pulse flow.
Noise level below 65 db.
Self-priming pump.
Modular Oil Bar System is ideal for use inside the garage or work shop, they are available in several different configurations(see catalogue page for further information).
Ideal for a fast dispensing of fluids such as lubricants or anti-freeze
Possibility of making a modular system with 2 or 3 dispensing taps
Each Module is supplied with 1 tap
Oil non-drip tray to collect fluids
.
Oil distributor and incorporated flow meter.
Manual dispensing or with preselection.
We have set ourselves the task of searching for new solutions to meet users requirements. It is from this careful analysis that the idea of an oil distributor with preselection (POD) was born. From now on it will be possible to dispense oil automatically.
The quantity to be dispensed can be preset; once this value is reached, dispensing is interrupted.
It is also possible to use the distributor in manual mode. The flow meter with oval gears allows you to obtain accurate measurements.
The POD functions are supplemented by a wide range of options which allow the modification of the units of measurement, up to five preset amounts memorized as well as the on-site calibration of the flow meter. The machine is powered by standard batteries, which are easily replaceable. An automatic anti-drip valve fitted on the one end allows for easy and clean filling operations. A modular support panel makes it easy to install the POD on cabinets that are equipped for fluid distribution.
This is a unique instrument, designed specially for operators in the trade.
Performance
Flow-rate from 1 to 15 l/min
Accuracy ± 0.5 % over the entire flow-rate field
Repetitivity 0.2%
Viscosity range from 5 to 2000 cSt
Max operating pressure: max 70 bar
Minimum preselection quantity: 0.1 litres
Maximum preselection quantity: 99.9 litres
Units of measurement that can be selected: Litres, Pints, Quarts and Gallons.
Presettable with the possibility to have up to 5 preset quantity memorized
