Currently Viewing - FLOWMETERS - Click links below for detailed section information . . MECHANICAL FLOW METERS . . ELECTRONIC FLOW METERS . . NOZZLE FLOW METERS . .   Technical Specs   Catalogue Page   K33 & K44 Mechanical Meters      K33 and K44 are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters are reliable, inexpensive, easy to install and simple to calibrate on the workplace. The Pulser model is fitted with a pulse emitter for connection to a fuel management system. Thanks to reduced flow resistance, they can also function by gravity. Performance Specifications . Flow-rate (range): 20÷120 l/min (5,3÷32 gal/min). . Precision: ±1% of flow range after calibration. . Repeatability: 0,2%. . Max. operating pressure: 10 bar (142 psi). . Bursting pressure: 30 bar (426 psi). . Readout system: - K33, 3-digit subtotals (max 999 litres), 6-digit totals. - K44, 4-digit subtotals (max 9999 litres), 7-digit totals. . Resolution: 0.1 litre. . Pulser card type: "Open collector", frequency: 10 pulses/litre, power supply: 6-24 V DC, max 10 mA.     Technical Specs   K700 Mechanical Flow Meter      Volumetric flow meter with mechanical indicator for dispensing control of diesel fuel in high flow-rate plants. Thanks to the measuring system with oval gears, high accuracy over the entire flow rate range is achieved, in addition to low pressure losses. Performance . Flow rates: from 20 to 220 l/min. . Accuracy: ± 1% over the flow rate range (40÷200 l/min). . Repeatability: 0,2%. . Max. working pressure: 10 bar. . Bursting pressure: 30 bar. . Partial with 4 digits (max 9999 litres), . Totaliser with 7 digits . Resolution: 0.1 litres . Can be calibrated.     Technical Specs   Catalogue Page   K40 Mechancial Oil Meter      The K40 Mechanical Oil Meter is a new oval gear meter with mechanical indicator. Thanks to the oval gear system adopted, the meter has been developed with an accurate measure of the quantity of oil dispensed together with a low flow resistance. Reliable, cheaper easy to use in every condition without the need of battery power, it can be installed in a dispensing line or directly to the hose end nozzle. . Flow rate 1 - 30ltr per min . Accuracy +/- 1% . Inlet/Outlet ½" Female . 70bar max working pressure . Burst Pressure 280bar . Counter: Partial 4 digits, Total 6 Digits     Technical Specs   Catalogue Page   HZ3 Oil Meter      Model HZ-3 Oil Flow meter is designed for use on oil delivery and oil burning furnaces (see technical sheet for further information). . Accuracy +/- 0.5% . 7 bar nominal pressure . ¼" Connection thread . 1.5kg weight (1.65kg when full of oil).     Technical Specs   Catalogue Page   HZ5 Oil Meter      Model HZ-5 Oil Flow meter designed for oil burning heating systems (see technical sheet for further information). . Accuracy +/- 1% . 25 bar pressure . 1/8" connection thread . 0.6kg weight     Technical Specs   Catalogue Page   1.5" Series 900 Meter      1 ½" F X F Mechanical Flowmeter Series 900. Comprised of robust weatherproof aluminium housing with glass filled polyester gears and chambers. Well proven nutating disc design, large 8 digit totaliser. Capacity 25 - 180 litres per minute max 9999 litres display.

Site Map